Modem yang saya pakai adalah modem ivio 2002 U, dengan flexinet unlimited dan berhasil konek, mudah kok gak ribet sama sekali...aku pake di ubuntu 10.04, nih caranya:
1. Colokin modem trus ketik di terminal lsusb, jika muncul seperti inBus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hubBus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 016: ID 10c4:ea60 Cygnal Integrated Products, Inc. CP210x Composite Device <<------ modem terdeteksi dengan baik
2. Ketikkan perintah dmesg untuk melakukan konfigurasi modem tersebut $ sudo dmesg, ketikkan password anda bila diminta dan bila muncul seperti ini
[ 247.836066] usb 6-1: new full speed USB device using uhci_hcd and address 2
[ 248.001279] usb 6-1: configuration #1 chosen from 1 choice
[ 248.067080] usbcore: registered new interface driver usbserial
[ 248.067417] USB Serial support registered for generic
[ 248.067748] usbcore: registered new interface driver usbserial_generic
[ 248.067752] usbserial: USB Serial Driver core
[ 248.080106] USB Serial support registered for cp210x
[ 248.080440] cp210x 6-1:1.0: cp210x converter detected
[ 248.192062] usb 6-1: reset full speed USB device using uhci_hcd and address 2
[ 248.341270] usb 6-1: cp210x converter now attached to ttyUSB0
[ 248.341309] usbcore: registered new interface driver cp210x
[ 248.341312] cp210x: v0.09:Silicon Labs CP210x RS232 serial adaptor driver
berarti modem sudah dapat digunakan
3. Jika belum melakukan instalasi wvdial, install wvdial dengan mengetikkan perintah
$sudo apt-get install wvdial
4. Editlah file konfigurasi di /etc/wvdial.conf, dan tambahakan konfigurasi seperti dibawah ini
[Dialer flexi]
Phone = #777
Username = xxxxxx@free
Password = telkom
New PPPD = yes
Modem = /dev/ttyUSB0
Baud = 230400
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ISDN = 0
Stupid Mode = on
Auto DNS = on
Modem Type = USB Modem
Auto Reconnect = on
# Abort on Busy = off
# Carrier Check = on
Check Def Route = on
# Abort on No Dialtone = on
iqbal@iqbal-laptop:~$ sudo wvdial flexi
--> WvDial: Internet dialer version 1.60
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATZ
ATZ
OK
--> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
OK
--> Modem initialized.
--> Sending: ATDT#777
--> Waiting for carrier.
ATDT#777
CONNECT
--> Carrier detected. Starting PPP immediately.
--> Starting pppd at Sat Aug 28 20:02:05 2010
--> Pid of pppd: 8239
--> Using interface ppp0
--> local IP address 10.1.101.166
--> remote IP address 172.17.163.80
--> primary DNS address 202.134.0.155
--> secondary DNS address 202.134.1.10
happy browsing
thanks bro buat infonya.
ReplyDeletekapan-kapan saya coba
otree gan...
ReplyDelete